Section SPS 320.17 - Effect of suspension and revocation(1) BEARING OF INSIGNIA. Upon suspension or revocation by the department of the approval of any modular home or manufactured building component, no further insignia shall be attached to any home or building component manufactured with respect to which the approval was suspended or revoked. Upon termination of such suspension or revocation, insignias may again be attached to the home or building component manufactured after the date approval is reinstated. Should any home or building component have been manufactured during the period of suspension or revocation, it shall not be entitled to bear the Wisconsin insignia unless the department has inspected, or caused to be inspected, such modular home or manufactured building component and is satisfied that all requirements for certification have been met.(2) RETURN OF INSIGNIAS. The manufacturer shall return to the department all insignias allocated for a modular home or manufactured building component no later than 30 days from the effective date of any suspension or revocation of the approval by the department. The manufacturer shall also return to the department all insignias which it determines for any reason are no longer needed.Wis. Admin. Code Department of Safety and Professional Services SPS 320.17
Cr. Register, November, 1979, No. 287, eff. 6-1-80; corrections made under s. 13.92(4) (b) 7, Stats., Register March 2009 No. 639.