Section SPS 340.40 - Adoption of standards by reference(1) PRIMARY STANDARDS. The following standards are hereby incorporated by reference into this chapter, subject to the modifications specified in this chapter: (a) American Petroleum Institute, 1220 L Street Northwest, Washington D.C. 20005: Design and Construction of Liquefied Petroleum Gas Installations, API standard 2510, 8th edition, May 2001.(b) National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02169-7471, telephone 800-344-3555, www.nfpa.org:1. Code for Motor Fuel Dispensing Facilities and Repair Garages, NFPA® 30A, 2008 edition.2. Vehicular Gaseous Fuel Systems Code, NFPA® 52, 2010 edition.3. National Fuel Gas Code, ANSI Z223.1-2009/NFPA® 54-2009.4. Liquefied Petroleum Gas Code, NFPA® 58, 2011 edition.5. Production, Storage, and Handling of Liquefied Natural Gas (LNG), NFPA®59A, 2009 edition.Note: Copies of the listed standards are on file in the offices of the Department and the Legislative Reference Bureau. Copies for personal use may be obtained, at a cost, from the organizations listed. Copies of the NFPA standards may also be accessed free of charge at www.nfpa.org.
(2)SECONDARY REFERENCES. Any codes or standards referenced in the standards adopted in sub. (1) shall apply to the prescribed extent of each such reference, except as modified by this chapter.(3)ALTERNATE STANDARDS. Any alternate standard that is equivalent to or more stringent than a standard incorporated by reference or otherwise referenced under this chapter may be used in lieu of the incorporated or referenced standard if the alternate standard is accepted in writing by the department.Wis. Admin. Code Department of Safety and Professional Services SPS 340.40
CR 11-002: cr. Register August 2011 No. 668, eff. 9-1-11.