Section SPS 340.20 - Definitions(1)"Alteration" means a change in a gas system that involves an extension or addition for, or involves the arrangement, type or purpose of, the existing installation or component.(2)"Approved" means acceptable to the department. Note: The Department will ordinarily accept items approved by a nationally recognized testing laboratory.
(3)"Certified inspector" means an individual who holds a valid credential issued by the department as a certified boiler-pressure vessel inspector.(4)"Container" means a vessel such as a tank, cylinder, bottle or drum used for storing of a gas or liquid.(5)"Department" means the department of safety and professional services.(6)"First class city" means a city of the first class, as established under s. 62.05, Stats. Note: As of September 1, 2011, only the City of Milwaukee had become a first class city.
(7)"Gas systems" means assemblies for storing, conveying, or dispensing the gases regulated by this chapter.(8)"Liquefied petroleum gas" has the meaning given in s. 101.16(1) (b), Stats. Note: Section 101.16(1) (b) of the Statutes reads as follows: " `Liquefied petroleum gas' means any material which is composed predominantly of, or any mixtures of, any of the following hydrocarbons including their isomers:
(9)"Pressure vessel" means a container for the containment of pressure, either internal or external. This pressure may be obtained from an external source or by the application of heat from a direct or indirect source, or any combination thereof.(10)"Repair" means the restoration of any portion or component of a gas system to a safe operating condition.(11)"Vehicle-fuel dispensing system" means all the pumps, meters, piping, hose and controls used for the delivery of fuel to, and the removal of vapor from, a vehicle.Wis. Admin. Code Department of Safety and Professional Services SPS 340.20
CR 11-002: cr. Register August 2011 No. 668, eff. 9-1-11; correction in (5) made under s. 13.92(4) (b) 6, Stats., Register December 2011 No. 672.