Section SPS 318.4205 - Control systems(1) This is a department informational note to be used under ANSI E1.42 section 5.1.3: Note: See s. SPS 316.620 and NEC 620 for additional requirements.
(2) Substitute the following wording for the requirements in ANSI E1.42 section 5.5.4: When actual and stored position data differ, setting or restoring position data for the lift shall only be done by qualified or competent persons.(3) Substitute the following wording for the requirements in ANSI E1.42 section 5.6.1.2: The circumstances requiring the override shall be investigated by a competent person before an override is engaged and may only be performed by an authorized person in communication with the operator. Override devices shall be located in a position so as to provide the authorized person a clear line of sight to the condition requiring the override. Indicators at all operator positions shall change state to inform the operator that the override has been engaged. The override device may not initiate motion without the direct action of the lift operator and shall limit speed and direction of travel while engaged.Wis. Admin. Code Department of Safety and Professional Services SPS 318.4205
Adopted by, CR:19-118: cr. Register May 2020 No. 773, eff. 6/1/2020