Section SPS 305.99 - Cross connection control assembly testers(1) GENERAL. Pursuant to s. 145.06 (3m), Stats., no person may conduct a performance test of a cross connection control assembly as required by s. SPS 382.22 (8) unless the person holds a registration issued by the department as a cross connection control assembly tester.(2) APPLICATION FOR REGISTRATION. A person applying for a cross connection control assembly tester registration shall submit all of the following: (a) An application in accordance with s. SPS 305.01.(b) An application fee and a registration fee in accordance with s. SPS 305.02, Table 305.02.(3) QUALIFICATIONS FOR REGISTRATION. A person applying for a cross connection control assembly tester registration shall have completed, at a minimum, one of the following: (am) At least 40 hours in a department approved course or courses in the theory of cross connection control, the operation, testing and maintenance of cross connection control assemblies, and the national standards for these cross connection control assemblies.(bm) An ASSE approved course meeting standard ASSE 5150.(4) RESPONSIBILITIES. A person who, as a registered cross connection control assembly tester, conducts performance tests of cross connection control assemblies shall be responsible for all of the following (a) Maintaining a record of each cross connection control assembly performance test conducted, including the date and the result of the test, for at least 2 years.(b) Making available to the department upon request his or her performance test records.(c) Following all procedures established by the department for conducting performance tests and filing the results.(5) RENEWAL. (a) A person may renew his or her registration as a cross connection control assembly tester.(b) A cross connection control assembly tester registration shall be renewed in accordance with s. SPS 305.07.(c)1. The renewal of a certification as a cross connection control assembly tester shall be contingent upon the cross connection control assembly tester obtaining at least 6 hours of approved continuing education prior to the expiration date of the certification as specified in s. SPS 305.08 and Table 305.06, except as provided in subd. 2.2. A person who holds a certification as a cross connection control assembly tester may apply to the department for waiver of the continuing education requirements under subd. 1. on the grounds of prolonged illness or disability or similar circumstances. The department shall consider each application for waiver individually on its merits.Wis. Admin. Code Department of Safety and Professional Services SPS 305.99
Cr. Register, October, 1996, No. 490, eff. 11-1-96; am. (3) (b) to (e), cr. (3) (f), Register, February, 1997, No. 494, eff. 3-1-97; am. (1) and (2) (b), Register, April, 2000, No. 532, eff. 5-1-00; CR 03-075: am. (3) (intro.) Register June 2004 No. 582, eff. 8-1-04; correction in (1) made under s. 13.92(4) (b) 7, Stats., Register May 2009 No. 641; CR 09-050: am. (1) and (3), renum. (4) to be (5), cr. (4) Register December 2009 No. 648, eff. 1-1-10; CR 10-064: cr. (5) (c) Register December 2010 No. 660, eff. 1-1-11; correction in (1), (2) (a), (b), (5) (b), (c) 1. made under s. 13.92(4) (b) 7, Stats., Register December 2011 No. 672; CR 14-010: am. (5) (c) 1. Register August 2014 No. 704, eff. 9-1-14.Amended by, CR 23-006: am. (title), (1), (2) (intro.), (3) (intro.), r. (3) (a) to (f), cr. (3) (am), (bm), am. (4) (intro.), (5) Register September 2023 No. 813, eff. 10/1/2023