Section SPS 363.0600 - Referenced standards This is a department rule in addition to the requirements in IECC chapter 6[CE]: The following standards are incorporated by reference into chs. SPS 361 to 366:
(1) ASTM C177-13, Test method for steady-state heat flux measurements and thermal transmission properties by means of the guarded-hot-plate apparatus.(2) ASTM C335/335M-10, Test method for steady state heat transfer properties of horizontal pipe insulation.(3) ASTM 518-15, Test method for steady-state thermal transmission properties by means of the heat flow meter apparatus.(4) ASTM C1363-11, Test method for thermal performance of materials and envelope assemblies by means of a hot box apparatus.(5) National Concrete Masonry Association (NCMA) Evaluation Procedures of Integrally Insulated Concrete Masonry Walls, January 1, 1999.Wis. Admin. Code Department of Safety and Professional Services SPS 363.0600
Adopted by, CR 06-120: cr. Register February 2008 No. 626, eff. 3-1-08; CR 16-094: renum. 363.0900 to 363.0600 and am. (intro.), (1) to (4), Register April 2018 No. 748, eff. 5/1/2018Amended by, correction in (5) (Note) made under s. 35.17, Stats, Register July 2018 No. 751, eff. 8/1/2018ASTM standards may be purchased at www.astm.org or from the American Society for Testing and Materials International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959.
NCMA Evaluation Procedures may be purchased at ncma.org or from the National Concrete Masonry Association, 13750 Sunrise Valley Drive, Herndon, VA 20171.
Copies of the standards adopted under this section are on file in the offices of the department and the legislative reference bureau.