Section SPS 361.485 - Effect of suspension and revocation(1) BEARING OF INSIGNIA. Upon suspension or revocation by the department of the approval of any manufactured modular multifamily dwelling or manufactured building component, the manufacturer may not attach a Wisconsin insignia to any modular multifamily dwelling or building component manufactured for which the approval was suspended or revoked. Upon the expiration date of the suspension or revocation, the manufacturer may resume the attachment of insignias to the dwelling or building component manufactured after the date approval is reinstated. If any dwelling or building component was manufactured during the period of suspension or revocation, the manufacturer may not attach the Wisconsin insignia unless the department has inspected, or caused to be inspected, the manufactured modular multifamily dwelling or manufactured building component and is satisfied that all requirements for certification have been met.(2) RETURN OF INSIGNIAS. The manufacturer shall return to the department all insignias allocated for a manufactured modular multifamily dwelling or manufactured building component no later than 30 days from the effective date of any suspension or revocation of the approval by the department. The manufacturer shall also return to the department all insignias that it determines are no longer needed.Wis. Admin. Code Department of Safety and Professional Services § SPS 361.485
Adopted by, CR 16-094: cr., Register April 2018 No. 748, eff. 5/1/2018