Section SPS 72.03 - Treatment procedures(1) Before any treatment commences, a patient shall be given the option, at the patient's own expense, to have treatment with disposable acupuncture needles, which have been sterilized and wrapped in accordance with s. 451.12, Stats., and maintained in accordance with s. SPS 72.02(7).(2) An acupuncturist shall wash his or her hands by scrubbing thoroughly for at least 10 seconds with soap or anti-microbial products between treatment of patients, immediately before an acupuncture procedure and after contact with blood or body fluids or obvious environmental contaminants.(3) A clean field shall be maintained to protect sterility of equipment used in acupuncture treatment of each patient.(4) A topical disinfectant shall be applied to the skin surface in the area prior to needle insertion or treatment that breaks the skin.(5) A sterile needle shall be maintained in a sterile state prior to insertion into an acupuncture point and its shaft shall not come in contact with fingers during insertion, positioning or other manipulation.Wis. Admin. Code Department of Safety and Professional Services SPS 72.03
Cr. Register, October, 1990, No. 418, eff. 11-1-90; am. (1), Register, May, 1998, No. 509, eff. 6-1-98; correction in (1) made under s. 13.92(4) (b) 7, Stats., Register November 2011 No. 671.