Section NR 280.06 - Application of effluent limitations and standards(1) The effluent limitations and standards set forth in this chapter shall be used in accordance with this section to establish the quantity or quality of pollutants or pollutant properties which may be discharged by a point source subject to the provisions of this chapter, except as:(a) They may be modified in accordance with subch. IV of ch. NR 220,(b) They may be superseded by more stringent limitations and standards necessary to achieve water quality standards or meet other legal requirements, or(c) They may be supplemented or superseded by standards or prohibitions for toxic pollutants or by additional limitations for other pollutants required to achieve water quality.(2) The production basis for the application of the limitations and standards set forth in this chapter shall be the daily average of annual production in each subcategory subject to the provisions of this chapter.(3) For a facility manufacturing silicones the total discharge limitations shall be determined: (a) For facilities manufacturing fluids only from the limitations for subcategory (21) (a) in the appropriate of table 1, 2, or 3;(b) For facilities manufacturing greases, emulsions, rubbers, and resins in addition to fluids from the sum of the limitations for subcategories (21) (a) and (21) (b) in table 1;(c) For facilities manufacturing coupling agents in addition to the products of par. (b) from the sum of the limitations for subcategories (21)(a), (21)(b), and (21)(c) in table 1; and(d) For facilities manufacturing greases, emulsions, rubbers, resins, and coupling agents in addition to fluids from the sum of the limitations for subcategories (21)(a) and (21)(b) in the appropriate of table 2 or table 3.Wis. Admin. Code Department of Natural Resources § NR 280.06
Cr. Register, June, 1976, No. 246, eff. 7-1-76.Amended by, Cr. Register, correction in (1) (a) made under s. 13.92(4) (b) 7, Stats., Register April 2018 No. 748, eff.5/1/2018