Wis. Admin. Code NR § 257.35
Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following pretreatment standards for existing sources. Degassing operations may not discharge wastewater pollutants.
Table 91
Core operation PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
mg/off-kg (lb/million off-lbs) of aluminum extruded | ||
Chromium | 0.15 | 0.061 |
Cyanide | 0.098 | 0.041 |
Zinc | 0.49 | 0.21 |
TTO | 0.23 | |
Oil and grease (alternate monitoring parameter) | 18.0 | 8.8 |
Table 92
Extrusion press leakage PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
mg/off-kg (lb/million off-lbs) of aluminum extruded | ||
Chromium | 0.65 | 0.27 |
Cyanide | 0.43 | 0.18 |
Zinc | 2.16 | 0.90 |
TTO | 1.02 | |
Oil and grease (alternate monitoring parameter) | 77.0 | 39.0 |
Table 93
Direct chill casting contact cooling water PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
mg/off-kg (lb/million off-lbs) of aluminum cast | ||
Chromium | 0.59 | 0.24 |
Cyanide | 0.39 | 0.16 |
Zinc | 1.94 | 0.81 |
TTO | 0.92 | |
Oil and grease (alternate monitoring parameter) | 69.0 | 35.0 |
Table 94
Press heat treatment contact cooling water PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
mg/off-kg (lb/million off-lbs) of aluminum quenched | ||
Chromium | 0.90 | 0.37 |
Cyanide | 0.59 | 0.25 |
Zinc | 2.98 | 1.25 |
TTO | 1.41 | |
Oil and grease (alternate monitoring parameter) | 110.0 | 53.0 |
Table 95
Solution heat treatment contact cooling water PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
mg/off-kg (lb/million off-lbs) of aluminum quenched | ||
Chromium | 0.90 | 0.37 |
Cyanide | 0.59 | 0.25 |
Zinc | 2.98 | 1.25 |
TTO | 1.41 | |
Oil and grease (alternate monitoring parameter) | 110.0 | 53.0 |
Table 96
Cleaning or etching bath PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | ||
Chromium | 0.079 | 0.032 |
Cyanide | 0.052 | 0.022 |
Zinc | 0.26 | 0.109 |
TTO | 0.124 | |
Oil and grease (alternate monitoring parameter) | 9.30 | 4.70 |
Table 97
Cleaning or etching rinse and hot water seal PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | ||
Chromium | 1.7 | 0.7 |
Cyanide | 1.2 | 0.5 |
Zinc | 5.7 | 2.4 |
TTO | 2.7 | |
Oil and grease (alternate monitoring parameter) | 200.0 | 100.0 |
Table 98
Cleaning or etching scrubber liquor PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | ||
Chromium | 0.85 | 0.35 |
Cyanide | 0.56 | 0.23 |
Zinc | 2.82 | 1.18 |
TTO | 1.34 | |
Oil and grease (alternate monitoring parameter) | 100.0 | 50.0 |
Wis. Admin. Code Department of Natural Resources § NR 257.35