Wis. Admin. Code NR § 254.127

Current through May 28, 2024
Section NR 254.127 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology

Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BCT:

Table 209

Strip, Sheet, and Miscellaneous Products Galvanizing, Terne Coating, and Other Coatings

BCT Effluent Limitations

Maximum for any 1 day

Average of

daily values for

30 consecutive

days

Pollutant or pollutant property

kg/kkg (pounds per 1,000 pounds) of product

TSS

0.175

0.0751

O&G

0.0751

0.0250

pH

(1)

(1)

(1) Within the range of 6.0 to 9.0

Table 210

Wire Products and Fasteners Galvanizing and Other Coatings

BCT Effluent Limitations

Maximum for any 1 day

Average of

daily values for

30 consecutive

days

Pollutant or pollutant property

kg/kkg (pounds per 1,000 pounds) of product

TSS

0.701

0.300

O&G

0.300

0.100

pH

(1)

(1)

(1) Within the range of 6.0 to 9.0

Table 211

Fume Scrubbers

BCT Effluent Limitations

Maximum for any 1 day

Average of

daily values for

30 consecutive

days

Pollutant or pollutant property

kg per day for each fume scrubber

TSS

38.1

16.3

O&G

16.3

5.45

pH

(1)

(1)

(1) Within the range of 6.0 to 9.0

State Code

Corresponding Federal Regulation

s. NR 205.03

40 CFR 401.11

s. NR 205.04

40 CFR 401.11

ch. NR 211

40 CFR Part 403

s. NR 211.03

40 CFR 403.3

s. NR 211.13

40 CFR 403.7

s. NR 211.14

40 CFR 403.13

s. NR 211.15

40 CFR 403.12

ch. NR 219

40 CFR Part 136

ch. NR 254

40 CFR Part 420

Wis. Admin. Code Department of Natural Resources § NR 254.127

Cr. Register, May, 1989, No. 401, eff. 6-1-89.

The Wisconsin administrative code corresponds to the code of federal regulations as cross referenced in the following table: