Section NR 233.40 - Identification of test procedures(1) Table 7 names the pesticide active ingredients subject to this chapter, together with the chemical abstracts service (CAS) number used for identification and the analytical method designation.(2) Except as provided in s. NR 219.033, the discharge parameter values required under the clean water act shall be determined by one of the analytical methods cited in Table 7.(3) Except where identical to Table 7, pesticide manufacturers may not use the analytical methods cited in ch. NR 219, Tables B, C and D.Wis. Admin. Code Department of Natural Resources NR 233.40
Cr. Register, March, 1997, No. 495, eff. 4-1-97.Amended by, CR 13-112: am. (2) Register May 2015 No. 713, eff. 6-1-15; correction in (2) made under s. 13.92(4) (b) 7, Stats., Register May 2015 No. 713, eff.6/1/2015 The full texts of the analytical methods cited in table 7 are contained in the "Methods For The Determination of Nonconventional Pesticides In Municipal and Industrial Wastewater, Volume I," EPA 821-R-93-010A (August 1993 Revision I) and "Volume II", EPA 821-R-93-010B (August 1993) (the "Compendium").