Wis. Admin. Code NR § 233.10

Current through May 28, 2024
Section NR 233.10 - Applicability; description of the organic pesticide chemicals manufacturing subcategory
(1) For the purpose of calculating and applying effluent limitations for COD, BOD5, and TSS, and applying pH limits under BPT in s. NR 233.12, BCT in s. NR 233.13, and NSPS in s. NR 233.15:
(a) This subchapter applies to discharges resulting from the manufacture of organic pesticide active ingredients and organo-tin pesticide active ingredients except those listed in par. (b).
(b) This subchapter does not apply to the following:

Allethrin Naphthalene acetic acid

Benzyl benzoate Propargite

Bisethlyxanthogen 1,8 Naphthalic anhydride

Chlorophacinone Quinmethionate

Coumafuryl Rotenone

Dimethyl phthalate Sulfoxide

Diphacinone Triazine compounds, both

Endothall acid symmetrical and EXD (Herbisan) asymmetrical

Gibberellic acid Warfarin and similar

Glyphosate anticoagulants.

(c) The effluent limitations of this subchapter for BOD5 and TSS, but not COD, apply to the manufacturers of the following:

Ametryn Prometryn

Atrazine Propazine

Cyanazine Simazine

Glyphosate Terbuthylazine

Hexazinone Terbutryn

Prometon

(2) For the purpose of calculating BPT effluent limitations in s. NR 233.12 for or ganic pesticide chemicals, this subchapter applies to discharges resulting from the manufacture of the following organic active ingredients:

2,4-D Fenuron

2,4,5-T Fenuron-TCA

Aldrin Heptachlor

Aminocarb Lindane

Azinphos methyl Linuron

Barban Malathion

BHC Methiocarb

Captan Methoxychlor

Carbaryl Mexacarbate

Chlordane Mirex

Chlorpropham Monuron

Diazinon Monuron-TCA

DDD Neubron

DDE Parathion ethyl

DDT Parathion methyl

Demeton-O PCNB

Demeton-S Perthane

Dicamba Propham

Dichloran Propoxur

Dicofol Siduron

Dieldrin Silvex

Disulfoton Swep

Diuron Toxaphene

Endosulfan Trifluralin

Endrin

(3) This subchapter does not apply to the intermediates used to manufacture the active ingredients, and active ingredients used solely in experimental pesticides. BPT coverage in this subchapter does not apply to insecticidal pathogenic organisms such as bacillus thuringiensis, insect growth hormones, plant extracts such as pyrethrins, sex attractants and botanicals such as Rotenone.
(4) A plant that manufactures a pesticide active ingredient listed in Table 1 shall comply with the BAT effluent limitations, new source performance standards, and pretreatment standards both for that ingredient listed in Table 2 or Table 3, and for priority pollutants listed in Tables 4, 5 and 6. The limitations apply as follows:
(a) Table 4 - BAT and NSPS - applies to existing and new direct discharge point sources that use end-of-pipe biological treatment.
(b) Table 5 - BAT and NSPS - applies to existing and new direct discharge point sources that do not use end-of-pipe biological treatment.
(c) Table 6 - PSES and PSNS - applies to existing and new sources that discharge to POTWs.
(5)
(a) The discharge quantity for lead and total cyanide shall be determined by multiplying the concentrations listed in the applicable tables times the flow from the non-complexed lead-bearing waste streams for lead and times the flow from non-complexed cyanide-bearing waste streams for total cyanide.
(b) This subchapter does not apply to discharges of cyanide in cyanide-bearing waste streams if:
1. The department or control authority determines that the cyanide limitations and standards are not achievable due to elevated levels of non-amenable cyanide, that is not oxidized by chlorine treatment, that result from the unavoidable complexing of cyanide at the process source of the cyanide-bearing waste stream and establishes an alternative total cyanide or amenable cyanide limitation that reflects the best available technology economically achievable.
2. The determination under subd. 1 shall be based upon a review of relevant engineering, production, and sampling and analysis information, including measurements of both total and amenable cyanide in the waste stream.
3. An analysis of the extent of complexing in the waste stream, based on the information in subds. 1 and 2, and its impact on cyanide treatability shall be set forth in writing and, for direct dischargers, be contained in the fact sheet required by 40 CFR 124.8.

Wis. Admin. Code Department of Natural Resources § NR 233.10

Cr. Register, March, 1997, No. 495, eff. 4-1-97.