Effluent limitations for point sources discharging BOD5 to the upper Wisconsin river shall be calculated according to the procedures contained in this section. These limitations shall apply from May 1 to October 31 annually.
Baseline Load = (Q) (8.34) (60) (C)
Where Q = The average daily flow for the publicly- owned point source during 1978 expressed in millions of gallons per day.
8.34 = Conversion factor (lbs./gal.).
60 = Concentration of BOD 5 expressed in milligrams per liter.
C = Reallocation conversion factor which has a value of 1.0 for the publicly-owned point source located between milepoints 205.3 and 199.4 and a value of 1.18 for the publicly-owned point sources located between milepoints 199.3 and 171.9.
Baseline Load = (BPT) (Production)
Where BPT = The final best practicable waste treatment effluent limitations for the point source as provided in ch. NR 284, expressed as pounds of BOD5 per ton of production. If ch. NR 284 does not apply, the best practicable waste treatment effluent limitations as determined under ch. NR 220 shall apply.
Production = The annual average off-machine production during 1978 expressed as tons per day.
Baseline Load = (Q) (8.34) (C)
Where Q = 0.55 million gallons per day for publicly- owned point sources located between milepoints 240.0 and 250.0 4.0 million gallons per day for publicly- owned point sources located between milepoints 250.0 and 260.0. 8.2 million gallons per day for publicly- owned point sources located between milepoints 260.0 and 265.0. 0.1 million gallons per day for publicly- owned point sources located between milepoints 265.0 and 271.1.
8.34 = Conversion factor (lbs./gal.).
C = 45 milligrams per liter concentrations of BOD5 for publicly-owned point sources located between milepoints 240.0 and 250.0, 250.0 and 260.0, and 265.0 and 271.1
60 milligrams per liter concentration of BOD5 for publicly-owned point sources located between milepoints 260.0 and 265.
Baseline Load = (BPT) (Production)
Where BPT = The final best practicable waste treatment effluent limitations for the point source as provided in ch. NR 284, or 220, when applicable, expressed as pounds of BOD5 per ton of production.
Production = The maximum weekly off-machine production during 1981 expressed as tons per day
Baseline Load = (BPT) (Production)
Where BPT = The final best practicable waste treatment effluent limitations for the point source as provided in ch. NR 284 or 220, when applicable, expressed as pounds of BOD5 per ton of production.
Production = The average weekly off-machine production expressed as tons per day from March to December 1973 for point sources located between milepoints 271.0 and 258.5 and the BPT permit limits for 1978 for point sources located between milepoints 258.4 and 258.2 and the average weekly off-machine production expressed as tons per day during 1974 for point sources located between milepoints 258.19 and 249.0 and the average weekly off-machine production expressed as tons per day during 1973 plus the woodroom allowance for sources located between milepoints 248.9 and 240.0.
Baseline Load = (Q) (8.34) (30)
Where Q = The design flow for the publicly-owned point source located between milepoints 341.4 and 313.2 and the year 2000 flow projection for those located between milepoints 313.3 and 305.9 expressed in millions of gallons per day.
8.34 = Conversion factor (lbs/gal.).
30 = Concentration of BOD5 expressed in milligrams per liter
Baseline Load = (BPT) (Production)
Where BPT = The final best practicable waste treatment effluent limitations for the point source as provided in ch. NR 284, expressed as pounds of BOD5 per ton of production. If ch. NR 284 does not apply, the best practicable waste treatment effluent limitations as determined under ch. NR 220 shall apply.
Production = The annual average off-machine production during 1978 expressed as tons per day.
Point Source Allocation=BL (T) D
Where BL = The baseline load for the individual point source calculated under sub. (1) (b)
T = The total maximum daily BOD 5 load available for allocation as shown in Table 1-m minus the sum of the point source allocations as determined in par. (a)
D = The sum of the baseline loads for nonpublicly-owned point sources calculated under sub. (1) (b).
For purposes of determining compliance with water quality related effluent limits, the following conditions shall be met:
Point Source Allocation = (Q) (8.34) (45)
Where Q = 3.1 million gallons per day
8.34 = Conversion factor (lbs./gal.)
45 = 45 milligrams per liter concentration of BOD5
Wis. Admin. Code Department of Natural Resources NR 212.60