Section NR 405.025 - Methods for calculation of increases in actual emissions(1) For projects that only involve existing emissions units, any increase in actual emissions from a physical change or change in the method of operation at a stationary source shall equal the sum of the difference between the projected actual emissions and the baseline actual emissions for each existing emissions unit involved in the project.(2) For projects that only involve construction of a new emissions unit or units, any increase in actual emissions from a physical change or change in the method of operation at a stationary source shall equal the sum of the differences between the potential to emit from each new emissions unit following completion of the project and the baseline actual emissions for each unit before the project.(3) For projects that involve existing and new emissions units, any increase in actual emissions from a physical change or change in the method of operation at a stationary source shall equal the sum of the emissions increases for each emissions unit involved in the project, using the method specified in sub. (1) for existing emissions units and the method in sub. (2) for new emissions units.Wis. Admin. Code Department of Natural Resources § NR 405.025
CR 03-118: cr. Register June 2007 No. 618, eff. 7-1-07.