Section ATCP 93.841 - Training elements for Class B operators Each Class B operator shall attend department-approved training in all of the following:
(1) Compared with training for a Class A operator, training for a Class B operator shall provide a more in-depth understanding of operation and maintenance aspects but may cover a more narrow breadth of applicable regulatory requirements. At a minimum, the department-approved training program shall teach the Class B operator, as applicable, about the purposes, methods, and function of:(a) Components of underground storage tank systems.(b) Materials of underground storage tank system components.(c) Methods of leak and release detection, and leak and release prevention applied to underground storage tank system components.(d) Operation and maintenance requirements of this chapter which apply to underground storage tank systems and which address each of the following: 3. Leak and release detection.6. Product compatibility.7. Reporting and record keeping requirements.8. Class C operator training requirements.(2) Each Class B operator shall receive either of the following: (a) Site-specific operator training that is focused only on regulatory requirements and equipment specific to the operator's underground storage tank system facility.(b) General training that encompasses all regulatory requirements and typical equipment used at UST facilities.Wis. Admin. Code Department of Agriculture, Trade and Consumer Protection ATCP 93.841
CR 09-017: cr. Register July 2009 No. 643, eff. 8-1-09.Amended by, CR 16-012: am. (2) (b) 5. Register August 2016 No. 728, eff. 9/1/2016Adopted by, CR 17-092: cr. Register October 2019 No. 766, eff. 11/1/2019