Current through Register Vol. XLI, No. 19, May 10, 2024
Section 56-8-7 - Primary Safety Program Components7.1. Depending upon the safety program needs of a particular mine or independent contractor, the comprehensive mine safety program may include any or all of the components contained in Section 7.2. of this rule. Comprehensive mine safety programs submitted by independent contractors shall address only the specific type of work to be performed by the contractor.7.2. A comprehensive mine safety program may include: 7.2.1. The operator or independent contractor's safety policy for each mine;7.2.2. The operator or independent contractor's policies regarding personal safety protection of each worker (hard hats, shoes, etc.);7.2.3. Safety training programs and objectives, including any or all of the following: 7.2.3.a. Classroom training;7.2.3.b. Workplace training;7.2.3.c. Safety meetings; and7.2.3.d. Informal training.7.2.4. The operator or independent contractor's practices and procedures for promoting: 7.2.4.a. Safe working practices for personnel;7.2.4.b. Safe working conditions in the mine environment; and7.2.4.c. Safe working practices for machinery, equipment, and systems.7.2.5. The operator or independent contractor's emergency provisions and procedures at the mine.7.2.6. The operator or independent contractor's procedures for accident investigation and reporting, which may include: 7.2.7. The operator or independent contractor's practices and procedures for comprehensive mine safety program promotion and enforcement; and7.2.8. Such other components deemed necessary by the operator or independent contractor to effectuate the goals of W. Va. Code § 22A-1-36.