Current through Register Vol. XLI, No. 24, June 14, 2024
Section 36-1-4 - No Shaft and/or Slope to be Opened Without Prior Approval of the Director4.1. An application for the sinking of a shaft and/or slope shall be filed by the coal mine operator for approval to the Director. All revisions to such approved application shall be resubmitted for approval to the Director. A shaft and/or slope permit application filed for approval with the Director shall include the following: 4.1.1. The name and address of the coal company and permit number, if such shaft and/or slope is an additional opening.4.1.2. A surface topographic map revealing the geographic location of the shaft and/or slope operation.4.1.3. A certified engineer's map revealing the locations of underground mining, oil, and/or gas wells and construction projects within five hundred (500) feet of the shaft and/or slope. 4.1.4. A certified engineer's map showing the profile of the shaft and/or slope.4.1.5. A description of the construction work and methods to be used in the construction of the slope and/or shaft, including a detailed description of how water rings will be constructed.4.1.6. The elevation, depth, and dimensions of the shaft and/or slope4.1.7. The location and elevation of the coal bed. 4.1.8. All hoisting and ventilation equipment will meet MSHA standards.4.1.9. The approved methane detectors to be used and/or other equipment needed to make proper methane examinations (such as probes or pumps). Also a description of how, where, and when these examinations will be conducted and the maintenance and calibration of detectors which will be in accordance with manufacturer's recommendations. A shaft and slope examiner can be certified by the Office of Miners' Health, Safety and Training to qualify other employees to make required methane examinations. 4.1.10. The company's comprehensive mine safety plan will detail specific training subject matter to be covered and established time frames of the training sessions. Also training will be conducted with examiners as the shaft and slope work approach coal bed seams that have a history of liberating methane. 4.1.11. Provide a list of all certified persons responsible for making all mandatory examinations and inspections (not limited to blasting, pre-shift, electrical, gas testing, etc.).