Statutes, codes, and regulations
Washington Administrative Code
Title 468 - Transportation, Department of (See Title 88)
Chapter 468-95 - Manual on uniform traffic control devices for streets and highways
Section 468-95-230 - Crosswalk markings

Wash. Admin. Code § 468-95-230

Download
PDF
Current through Register Vol. 24-20, October 15, 2024
Section 468-95-230 - Crosswalk markings

Amend paragraph 15 in MUTCD Section 3B.18 to read:

If used, the diagonal or longitudinal lines should form a 24-inch wide marking pattern consisting of two 8-inch wide markings separated by an 8-inch wide gap or a 24-inch wide solid marking pattern. The marking patterns should be spaced 12 to 60 inches apart but with the maximum gap between marking patterns not to exceed 2.5 times the marking pattern width. Longitudinal marking patterns should be located to avoid the wheel paths and should be oriented parallel with the wheel paths.

Wash. Admin. Code § 468-95-230

Statutory Authority: RCW 47.36.030. 11-23-101, § 468-95-230, filed 11/18/11, effective 12/19/11. Statutory Authority: Chapter 34.05 RCW and RCW 47.36.030. 03-06-053, § 468-95-230, filed 2/28/03, effective 3/31/03.