Statutes, codes, and regulations
Washington Administrative Code
Title 468 - Transportation, Department of (See Title 88)
Chapter 468-95 - Manual on uniform traffic control devices for streets and highways
Section 468-95-200 - Approach markings for obstructions

Wash. Admin. Code § 468-95-200

Download
PDF
Current through Register Vol. 24-20, October 15, 2024
Section 468-95-200 - Approach markings for obstructions

Amend paragraph 01 of MUTCD Section 3B.10 to read:

Pavement markings shall be used to guide traffic away from fixed obstructions within a paved roadway. Approach markings for bridge supports, refuge islands, median islands, toll plazas, and channelization islands (except channelization islands formed by paint stripes or raised pavement markers) shall consist of a diagonal line or lines extending from the center line or the lane line to a point1 to 2feet to the right side, or to both sides, of the approach end of the obstruction (see Figure3B-15).

Amend paragraph 07 of MUTCD Section 3B.10 to read:

If traffic is required to pass only to the right of the obstruction, the markings shall consist of a no-pass marking, approaching the obstruction, at least twice the length of the diagonal portion as determined by the appropriate taper formula (see Figure3B-15).

Modify MUTCD Figure 3B-15, Item a - Center of two-lane road, to show a single no-pass marking on the approach to the obstruction.

Wash. Admin. Code § 468-95-200

Statutory Authority: RCW 47.36.030. 11-23-101, § 468-95-200, filed 11/18/11, effective 12/19/11. Statutory Authority: Chapter 34.05 RCW and RCW 47.36.030. 03-06-053, § 468-95-200, filed 2/28/03, effective 3/31/03.