A cab and chassis is an incomplete truck shipped from the manufacturer. The customer chooses the type of bed to be installed.
Yes. However, because the cab and chassis is an incomplete vehicle, when the body or special equipment has been installed you must apply for a new certificate of ownership to reflect the correct series and body type, scale weight and the completed vehicle's new value.
Yes, if you intend to use the vehicle on the public highways. The gross weight will be limited to one hundred fifty percent of the scale weight. Gross weight is rounded up to the nearest two thousand pound increment and may not be increased until the certificate of ownership is corrected to reflect the completed vehicle information.
Whether you titled the cab and chassis or waited until the vehicle was completed before titling, you need to provide the department with the following before you use the completed vehicle on the public highways:
Wash. Admin. Code § 308-96A-145
Statutory Authority: RCW 46.01.110. 01-12-099, § 308-96A-145, filed 6/6/01, effective 7/7/01. Statutory Authority: RCW 46.16.276, 43.17.060, 46.16.600 and 46.01.110. 99-06-029, § 308-96A-145, filed 2/24/99, effective 3/27/99. Statutory Authority: RCW 46.16.135, 46.16.225, 46.16.490 and 46.01.110. 86-10-040 (Order TL/RG 24), § 308-96A-145, filed 5/5/86; Order MV-328, § 308-96A-145, filed 7/24/75.