Statutes, codes, and regulations
Washington Administrative Code
Title 296 - Labor and Industries, Department ofChapter 296-96 - Safety regulations and fees for all elevators, dumbwaiters, escalators and other conveyances
Part C2 - PRIVATE RESIDENCE INCLINED ELEVATORS
Section 296-96-07150 - Guide rails, track supports and fastenings

Wash. Admin. Code § 296-96-07150

Download
PDF
Current through Register Vol. 24-17, September 1, 2024
Section 296-96-07150 - Guide rails, track supports and fastenings
(1) Guides, guide rails, guide rail brackets, and their fastenings and supports shall, at the point of support, deflect 3.175 mm (0.125 in.) or less while resisting horizontal forces encountered during loading. When horizontal force is measured at a mid-point between brackets, guide rails shall deflect 6.35 mm (0.25 in.) or less in any direction.
(2) Fixed, suspended cable guides may be used as a guide member(s). When used, the deflection is to be specified by the manufacturer and approved by a structural engineer licensed in the state of Washington.

Wash. Admin. Code § 296-96-07150

Amended by WSR 18-18-070, Filed 8/31/2018, effective 10/1/2018
Amended by WSR 21-18-096, Filed 8/31/2021, effective 10/1/2021
Amended by WSR 23-17-141, Filed 8/22/2023, effective 10/2/2023

Statutory Authority: Chapter 70.87 RCW. 07-24-041, § 296-96-07150, filed 11/30/07, effective 1/1/08. Statutory Authority: RCW 70.87.020, 70.87.030, 70.87.034, 70.87.120, 70.87.185 and chapter 70.87 RCW. 01-02-026, § 296-96-07150, filed 12/22/00, effective 1/22/01.