Section 296-874-30032 - Meet these requirements when using catenary scaffolds(1) You must make sure catenary scaffolds have: (a) No more than one platform between consecutive vertical pickups; and(b) No more than two platforms per scaffold. (2) You must make sure any platform that's supported by wire ropes has hook-shaped stops placed at each end of the platform that will prevent it from falling if one of the horizontal wire ropes breaks.(3) You must make sure wire ropes are:(a) Continuous and without splices between anchors; and(b) Not tightened to the point that putting a load on the scaffold will overstress them. Reference: | For specific fall protection requirements for employees on catenary scaffolds, go to WAC 296-874-20056. |
Wash. Admin. Code § 296-874-30032
Amended by WSR 15-23-086, Filed 11/17/2015, effective 12/18/2015Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. 05-01-054, § 296-874-30032, filed 12/7/04, effective 3/1/05.