Wash. Admin. Code § 296-869-20030

Current through Register Vol. 24-21, November 1, 2024

Section 296-869-20030 - Operator prestart inspection

(1) You must make sure the operator does a prestart inspection of the aerial device as shown in Table 1, Operator Prestart Inspection.

(2) You must have a qualified person examine or test any items found during the inspection that are thought to be unsafe to determine if they constitute a safety hazard.

(3) You must replace or repair all unsafe items before use.

Table 1

Operator Prestart Inspection

Component or system:	Test or inspect for the following:
Operating controls and associated mechanisms	Conditions interfering with proper operation
Visual and audible safety devices	Malfunctions
Hydraulic or pneumatic systems	Visible deterioration or excessive leaks
Fiberglass and other insulating components	Visible damage or contamination
Operational and instructional markings	That they are present and legible
Electrical systems of or related to the aerial device	Malfunction and for signs of excessive deterioration, dirt, and moisture accumulation
Locking devices, bolts, pins, and other fasteners	That they are in-place and not loose or deformed

Wash. Admin. Code § 296-869-20030

Amended by WSR 15-23-086, Filed 11/17/2015, effective 12/18/2015

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. 06-19-073, § 296-869-20030, filed 9/19/06, effective 1/1/07.