Wash. Admin. Code § 296-863-40015

Current through Register Vol. 24-17, September 1, 2024
Section 296-863-40015 - Make sure PIT loads are carried safely
(1) You must make sure loads are stable, safe and within the rated load capacity of the PIT.
(2) You must do both of the following when picking up a load:
(a) Place the load engaging means under the load as far as possible;
(b) Tilt the mast carefully backwards to stabilize the load.
(3) You must make sure not to tilt the load engaging means forward when it is elevated unless:
(a) Picking up a load; or
(b) Depositing a load on a rack or stack.
(4) You must do both of the following when traveling with a load:
(a) Keep the load trailing if it obstructs the operator's forward view;
(b) Travel with the load upslope when climbing or descending slopes of more than ten percent.
(5) You must do both of the following when climbing a slope:
(a) Tilt the load and load engagement means backwards if necessary to stabilize the load; and
(b) Raise the load and load engagement means only as far as necessary to clear the surface.
(6) You must make sure PITS with attachments are operated as partially loaded trucks, even if they are not carrying a load.

Wash. Admin. Code § 296-863-40015

Amended by WSR 17-18-075, Filed 9/5/2017, effective 10/6/2017

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. 04-19-051, § 296-863-40015, filed 9/14/04, effective 2/1/05.