Wash. Admin. Code § 296-863-30010

Current through Register Vol. 24-17, September 1, 2024

Section 296-863-30010 - Inspect your PITs

(1) You must inspect PITs according to the manufacturer's instructions.

(2) You must inspect PITs at these times:

(a) Daily before being put into service; and

(b) After each shift, if the PIT is used on a continuous (twenty-four-hour) basis.

Note:

You can designate someone on the off-going shift, on-coming shift, or some other person to do the inspection.

(3) You must report and correct any deficiencies noted during the inspection.

Wash. Admin. Code § 296-863-30010

Amended by WSR 17-18-075, Filed 9/5/2017, effective 10/6/2017

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. 04-19-051, § 296-863-30010, filed 9/14/04, effective 2/1/05.