Wash. Admin. Code § 296-807-18020

Current through Register Vol. 25-01, January 1, 2025

Section 296-807-18020 - Use specific safety guards for machines using Type 1 grinding wheels, cutting-off wheels, and tuck pointing wheels

You must make sure the safety guard covers the top and sides of the wheel for at least one hundred eighty degrees.

Note:

It is not required to cover the spindle end, nut and outer flange.

Wash. Admin. Code § 296-807-18020

Amended by WSR 15-23-086, Filed 11/17/2015, effective 12/18/2015

Statutory Authority: RCW 49.17.010, [49.17].040,[49.17].050, and [49.17].060. 03-09-009, § 296-807-18020, filed 4/4/03, effective 8/1/03.