Wash. Admin. Code § 296-807-180
Current through Register Vol. 25-01, January 1, 2025
This section applies to portable tools using abrasive wheels.
Exemption:
This section does not apply to machines using:
Your responsibility:
Make sure abrasive wheel tools and wheels are safe to use.
| You must meet the requirements ... | in this section: |
| Make sure abrasive wheels and tools are properly designed and constructed | WAC 296-807-18005 |
| Make sure machines have safety guards | WAC 296-807-18010 |
| Keep safety guards in good functional condition | WAC 296-807-18015 |
| Use specific safety guards for machines using Type 1 grinding wheels, cutting-off wheels, and tuck pointing wheels | WAC 296-807-18020 |
| Use specific safety guards for vertical and angle grinders using Type 6 or Type 11 wheels | WAC 296-807-18025 |
| Use specific safety guards for vertical and angle grinders using Type 27, 28 and 29 wheels | WAC 296-807-18030 |
| Use side handles on vertical and angle grinders | WAC 296-807-18035 |
| Make sure abrasive wheels are safe to use | WAC 296-807-18040 |
| Mount wheels properly | WAC 296-807-18045 |
| Use proper flanges | WAC 296-807-18050 |
| Make sure flanges are in good condition | WAC 296-807-18055 |
| Use specific flanges for Type 1 cutting-off wheels | WAC 296-807-18060 |
| Use specific flanges for Type 27A cutting-off wheels | WAC 296-807-18065 |
| Use specific flanges for threaded hole wheels | WAC 296-807-18070 |
| Use specific flanges for cup, cone or plug wheels with threaded inserts or projecting studs | WAC 296-807-18075 |
| Use blotters when required | WAC 296-807-18080 |
| Meet specific blotter requirements when using modified Types 6 and 11 wheels (terrazzo) | WAC 296-807-18085 |
Wash. Admin. Code § 296-807-180
Statutory Authority: RCW 49.17.010, [49.17].040,[49.17].050, and [49.17].060. 03-09-009, § 296-807-180, filed 4/4/03, effective 8/1/03.