Wash. Admin. Code § 296-807-15030

Current through Register Vol. 25-01, January 1, 2025

Section 296-807-15030 - Use proper powder loads

You must use only a powder load that is:

(1) Recommended by the tool manufacturer for the particular tool; or

(2) One that provides the same level of safety and performance.

Wash. Admin. Code § 296-807-15030

Amended by WSR 15-23-086, Filed 11/17/2015, effective 12/18/2015

Statutory Authority: RCW 49.17.010, [49.17].040,[49.17].050, and [49.17].060. 03-09-009, § 296-807-15030, filed 4/4/03, effective 8/1/03.