Wash. Admin. Code § 296-807-15015

Current through Register Vol. 24-23, December 1, 2024

Section 296-807-15015 - Make sure tools are adequately designed and constructed

(1) You must make sure the tool meets the design and construction requirements of the American National Standards Institute (ANSI) standard ANSI A10.3-1995, Safety Requirements for Powder-Actuated Fastening Systems.

Note:

There may be a statement on the tool or in the instruction manual indicating the tool meets the requirements of the appropriate ANSI standard. If in doubt, check with the manufacturer.

(2) You must make sure each tool has:

(a) Operator instructions and a tool service manual;

(b) Powder load and fastener chart;

(c) Service tools and accessories.

Wash. Admin. Code § 296-807-15015

Amended by WSR 15-23-086, Filed 11/17/2015, effective 12/18/2015

Statutory Authority: RCW 49.17.010, [49.17].040,[49.17].050, and [49.17].060. 03-09-009, § 296-807-15015, filed 4/4/03, effective 8/1/03.