Wash. Admin. Code § 296-806-48018

Current through Register Vol. 24-17, September 1, 2024

Section 296-806-48018 - Provide kickback protection for self-feed circular ripsaws when ripping wood products

You must provide saws with sectional nonkickback fingers that meet all of the following requirements:

(1) They cover the full width of the feed roll.

(2) They are located in front of the saw.

(3) They are arranged so they keep continuous contact with the material being fed.

Wash. Admin. Code § 296-806-48018

Amended by WSR 15-24-102, Filed 12/1/2015, effective 1/5/2016

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-48018, filed 6/29/04, effective 1/1/05.