Wash. Admin. Code § 296-806-47506

Current through Register Vol. 24-17, September 1, 2024

Section 296-806-47506 - Guard belt sanders

You must protect the operator by guarding:

(1) Nip points where the sanding belt runs on the pulleys.

(2) The unused run of the sanding belt.

Wash. Admin. Code § 296-806-47506

Amended by WSR 15-24-102, Filed 12/1/2015, effective 1/5/2016

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-47506, filed 6/29/04, effective 1/1/05.