Wash. Admin. Code § 296-806-450
Current through Register Vol. 24-17, September 1, 2024
Summary
In addition to the requirements in this section, you need to refer to the following sections of this chapter in order to fully protect your employees from machine hazards:
Requirements for all machines, WAC 296-806-200 and 296-806-300.
This section applies to the hazards associated with metal and woodworking lathes.
Your responsibility:
To protect employees from hazards associated with metal and woodworking lathes.
METAL LATHES
| You must meet the requirements& | in this section: |
| Provide shields or guards on metal lathes for chip or coolant hazards | WAC 296-806-45002 |
| Safeguard work-holding devices (chucks) | WAC 296-806-45004 |
| Follow these requirements for chip control and handling | WAC 296-806-45006 |
| Safeguard power-clamping devices | WAC 296-806-45008 |
| Restrain extended work-pieces on horizontal lathes | WAC 296-806-45010 |
Wash. Admin. Code § 296-806-450
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-450, filed 6/29/04, effective 1/1/05.