Wash. Admin. Code § 296-806-43028

Current through Register Vol. 24-17, September 1, 2024

Section 296-806-43028 - Protect against sparks from saws

You must provide all saws with a sheet metal guard that is positioned to stop sparks. The guard must be constructed of at least one-eighth inch sheet metal.

Note:

It is advisable to provide all saws with a means to trap sparks below the saw and to use a tank of water below the saw to reduce the fire hazard.

Reference:

Other saw requirements may be found in, Saws and cutting heads, WAC 296-806-480.

Wash. Admin. Code § 296-806-43028

Amended by WSR 15-24-102, Filed 12/1/2015, effective 1/5/2016

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-43028, filed 6/29/04, effective 1/1/05.