Wash. Admin. Code § 296-806-410
Current through Register Vol. 24-21, November 1, 2024
Summary
In addition to the requirements in this section, you need to refer to the following sections of this chapter in order to fully protect your employees from machine hazards:
Requirements for all machines, WAC 296-806-200 and 296-806-300.
This section applies only to hazards associated with calenders in the rubber and plastics industry where two or more metal rolls are set vertically and revolving in opposite directions.
Your responsibility:
To protect employees from hazards associated with calenders.
| You must meet the requirements... | in this section: |
| Provide calender safety controls | WAC 296-806-41002 |
| Follow these stopping limit requirements for calenders | WAC 296-806-41004 |
Wash. Admin. Code § 296-806-410
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. WSR 04-14-028, § 296-806-410, filed 6/29/04, effective 1/1/05.