Wash. Admin. Code § 296-803-500
Your responsibility: To make sure energy control procedures are used and include these requirements.
You must meet the requirements... | in this section: |
Energy Control Procedures | |
Use energy control procedures | WAC 296-803-50005 |
Applying Lockout or Tagout Devices | |
Meet these requirements when applying lockout or tagout devices | WAC 296-803-50010 |
Meet these additional requirements when applying lockout devices | WAC 296-803-50015 |
Meet these additional requirements when applying tagout devices | WAC 296-803-50020 |
Stored Energy | |
Protect employees from the hazards of stored and residual energy | WAC 296-803-50025 |
Verifying Machine Isolation | |
Verify that the machine or equipment is safe before starting work | WAC 296-803-50030 |
Removing Energy Control Devices | |
Meet these requirements when removing lockout or tagout devices and energizing the machine or equipment | WAC 296-803-50035 |
Temporary Energization | |
Meet these requirements if it is necessary to temporarily energize a machine, equipment, or component for testing or positioning | WAC 296-803-50040 |
Shift or Personnel Changes | |
Protect employees during shift or personnel changes. | WAC 296-803-50045 |
Group Lockout/Tagout | |
Protect employees working in a group | WAC 296-803-50050 |
Meet these additional requirements if more than one group is used | WAC 296-803-50055 |
Outside Employers | |
Coordinate with outside employers servicing or maintaining your machines or equipment | WAC 296-803-50060 |
Wash. Admin. Code § 296-803-500
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-15-105, § 296-803-500, filed 7/20/04, effective 11/1/04.