Statutes, codes, and regulations
Washington Administrative Code
Title 296 - Labor and Industries, Department of
Chapter 296-79 - Safety standards for pulp, paper, and paperboard mills and converters
Section 296-79-31009 - Die cutting

Wash. Admin. Code § 296-79-31009

Download
PDF
Current through Register Vol. 24-21, November 1, 2024
Section 296-79-31009 - Die cutting

Bobst type die cutters.

A minimum of 4 inches must be provided between the end of the slat and the guide bar.

Wash. Admin. Code § 296-79-31009

Statutory Authority: RCW 49.17.010, 49.17.040 and 49.17.050. 99-16-083, § 296-79-31009, filed 8/3/99, effective 11/3/99; Order 74-24, § 296-79-31009, filed 5/6/74.