Statutes, codes, and regulations
Washington Administrative Code
Title 296 - Labor and Industries, Department of
Chapter 296-79 - Safety standards for pulp, paper, and paperboard mills and converters
Section 296-79-29027 - Guillotine type roll splitters

Wash. Admin. Code § 296-79-29027

Download
PDF
Current through Register Vol. 24-21, November 1, 2024
Section 296-79-29027 - Guillotine type roll splitters
(1) The engaging control for activating the guillotine blade must be a "deadman type" switch that demands continuous operator activation and must be:
(a) A positive two-hand operating control; or
(b) Located far enough from the cutting location so that the operator cannot reach the blade during the cutting process.
(2) Personnel must not position any part of the body under the blade.
(3) Rolls must be in the horizontal position while being split.
(4) Rolls must be centered directly below the blade.

Wash. Admin. Code § 296-79-29027

Amended by WSR 17-16-132, Filed 8/1/2017, effective 9/1/2017

Statutory Authority: RCW 49.17.010, 49.17.040 and 49.17.050. 99-16-083, § 296-79-29027, filed 8/3/99, effective 11/3/99; Order 76-7, § 296-79-29027, filed 3/1/76; Order 74-24, § 296-79-29027, filed 5/6/74.