Maximum permissible limit (in µg/m3) = 400 ÷ hours worked in the day.
TABLE 1
Industry | Compliance dates:1 (50 µg/m3) |
Lead chemicals, secondary copper smelting. | July 19, 1996 |
Nonferrous foundries ........... | July 19, 1996.2 |
Brass and bronze ingot manufacture. | 6 years.3 |
1 Calculated by counting from the date the stay on implementation of subsection (6)(a) was lifted by the U.S. Court of Appeals for the District of Columbia, the number of years specified in the 1978 lead standard and subsequent amendments for compliance with the PEL of 50 µg/m3 for exposure to airborne concentrations of lead levels for the particular industry.
2 Large nonferrous foundries (20 or more employees) are required to achieve the PEL of 50 µg/m3 by means of engineering and work practice controls. Small nonferrous foundries (fewer than 20 employees) are required to achieve an 8-hour TWA of 75 µg/m3 by such controls.
3 Expressed as the number of years from the date on which the Court lifts the stay on the implementation of subsection (6)(a) for this industry for employers to achieve a lead in air concentration of 75 µg/m3. Compliance with subsection (6) in this industry is determined by a compliance directive that incorporates elements from the settlement agreement between OSHA and representatives of the industry.
DANGER: CLOTHING AND EQUIPMENT CONTAMINATED WITH LEAD. MAY DAMAGE FERTILITY OR THE UNBORN CHILD. CAUSES DAMAGE TO THE CENTRAL NERVOUS SYSTEM. DO NOT EAT, DRINK OR SMOKE WHEN HANDLING. DO NOT REMOVE DUST BY BLOWING OR SHAKING. DISPOSE OF LEAD CONTAMINATED WASH WATER IN ACCORDANCE WITH APPLICABLE LOCAL, STATE, OR FEDERAL REGULATIONS.
The employer must prohibit the removal of lead from protective clothing or equipment by blowing, shaking, or any other means which disperses lead into the air.
The content of medical examinations made available pursuant to subitems (11)(c)(i)(C) through (D) of this section must be determined by an examining physician and, if requested by an employee, shall include pregnancy testing or laboratory evaluation of male fertility.
DANGER
LEAD
MAY DAMAGE FERTILITY OR THE UNBORN CHILD
CAUSES DAMAGE TO THE CENTRAL NERVOUS SYSTEM
DO NOT EAT, DRINK OR SMOKE IN THIS AREA
The employer must comply with any additional requirements involving transfer of records set forth in WAC 296-802-60005.
TABLE 1
Effective Date | Removal Blood Level (µg/100g) | Air Lead (µg/m3) | Return Blood Lead (µg/100g) |
9/6/81 | At or above 70 | 50 or above | At or below 50 |
9/6/82 | At or above 60 | 30 or above | At or below 40 |
9/6/84 | At or above 50 averaged over six months | 30 or above | At or below 40 |
DANGER LEAD
MAY DAMAGE FERTILITY OR THE UNBORN CHILD
CAUSES DAMAGE TO THE CENTRAL NERVOUS SYSTEM
DO NOT EAT, DRINK OR SMOKE IN THIS AREA
*The term inorganic lead used throughout the medical surveillance appendices is meant to be synonymous with the definition of lead set forth in the standard.
Industry | Permissible Lead Level/Compliance Date | ||
200µg/m3 | 100µg/m3 | 50µg/m3 | |
Primary Lead Production | 1973 | 06/29/84 | 06/29/91 |
Secondary Lead Production | 1973 | 06/29/84 | 06/29/91 |
Lead Acid Battery Manufacturing | 1973 | 06/29/83 | 06/29/91 |
Automobile Mfg./Solder, Grinding | 1973 | N/A | 03/08/97 |
Electronics, Gray Iron Foundries, Ink Mfg., Paints and Coatings Mfg., Can Mfg., Wallpaper Mfg., and Printing. | 1973 | N/A | 06/29/91 |
Lead Chemical Mfg., Nonferrous Foundries, Leaded Steel Mfg., Battery Breaking in the Collection and Processing of Scrap (when not a part of secondary lead smelter) Secondary Copper Smelter, Brass and Bronze Ingot Production. | 1973 | N/A | N/A1* |
All Other Industries | 1973 | N/A | 09/08/92 |
* Feasibility of achieving the PEL by engineering and work practice controls for these industries has yet to be resolved in court, therefore no date has been scheduled.
TABLE 10 EFFECTIVE DATE
Sept. 6, 1980 | Sept. 6, 1981 | Sept. 6, 1982 | Sept. 6, 1983 | Sept. 6, 1984 | |
A. Blood lead level requiring employee medical removal (level must be confirmed with second follow-up blood lead level within two weeks of first report). | >80 µg/100g. | >70 µg/100g. | >60 µg/100g. | >60 µg/100g. | >60 µg/100g or average of last three blood samples or all blood samples over previous 6 months (whichever is over a longer time period) is 50 µg/100g. or greater unless last sample is 40 µg/100g or less. |
B. Frequency which employees exposed is action level of lead (30 µg/m8 TWA) must have blood lead level checked. (ZPP is also required in each occasion that a blood test is obtained): | |||||
1. Last blood lead level less than 40 µg/100g | Every 6 months. | Every 6 months. | Every 6 months. | Every 6 months. | Every 6 months. |
2. Last blood lead level between 40 µg/100g and level requiring medical removal (see A above) ........ | Every 2 months. | Every 2 months. | Every 2 months. | Every 2 months. | Every 2 months. |
3. Employees removed from exposure to lead because of an elevated blood lead level ................ | Every 1 month. | Every 1 month. | Every 1 month. | Every 1 month. | Every 1 month. |
C. Permissible airborne exposure limit for workers removed from work due to an elevated blood lead level (without regard to respirator protection). | 100 µg/m3 8 hr TWA | 50 µg/m3 8 hr TWA | 30 µg/m3 8 hr TWA | 30 µg/m3 8 hr TWA | 30 µg/m3 8 hr TWA |
D. Blood lead level confirmed with a second blood analysis, at which employee may return to work. Permissible exposure without regard to respirator protection is listed by industry in Table 1. | 60 µg/100g | 50 µg/100g | 40 µg/100g | 40 µg/100g | 40 µg/100g |
Note: | Where medical opinion indicates that an employee is at risk of material impairment from exposure to lead, the physician can remove an employee from exposure exceeding the action level (or less) or recommend special protective measures as deemed appropriate and necessary. Medical monitoring during the medical removal period can be more stringent than noted in the table above if the physician so specifies. Return to work or removal of limitations and special protections is permitted when the physician indicates that the worker is no longer at risk of material impairment. |
Gastrointestinal. Lead may also effect the gastrointestinal system producing abdominal colic or diffuse abdominal pain, constipation, obstipation, diarrhea, anorexia, nausea and vomiting. Lead colic rarely develops at blood lead levels below 80 µg/100g.
General | - Weight loss, fatigue, decreased appetite. |
Head, Eyes, Ears, Nose, Throat (HEENT) | - Headaches, visual disturbance or decreased visual acuity, hearing deficits or tinnitus, pigmentation of the oral mucosa, or metallic taste in mouth. |
Cardiopulmonary | - Shortness of breath, cough, chest pains, palpitations, or orthopnea. |
Gastrointestinal | - Nausea, vomiting, heartburn, abdominal pain, constipation or diarrhea. |
Neurologic | - Irritability, insomnia, weakness (fatigue), dizziness, loss of memory, confusion, hallucinations, incoordination, ataxia, decreased strength in hands or feet, disturbance in gait, difficulty in climbing stairs, or seizures. |
Hematologic | - Pallor, easy fatigability, abnormal blood loss, melena. |
Reproductive (male or female and spouse where relevant) | - History of infertility, impotence, loss of libido, abnormal menstrual periods, history of miscarriages, stillbirths, or children with birth defects. |
Musculoskeletal | - Muscle and joint pains. |
The department advises employers that the following tasks have a high risk for lead overexposure (this list is not complete; other tasks also can result in lead over-exposure):
* Any open flame operation involving lead-containing solder in a manner producing molten solder, including the manufacture or repair of motor vehicle radiators;
* Sanding, cutting or grinding of lead-containing solder;
* Breaking, recycling or manufacture of lead-containing batteries;
* Casting objects using lead, brass, or lead-containing alloys;
* Where lead-containing coatings or paints are present:
* abrasive blasting
* welding
* cutting
* torch burning
* manual demolition of structures
* manual scraping
* manual sanding
* heat gun applications
* power tool cleaning
* rivet busting
* clean-up activities where dry expendable abrasives are used
* abrasive blasting enclosure movement and removal;
* Spray-painting with lead-containing paint;
* Using lead-containing mortar;
* Lead burning;
* Operation or cleaning of shooting facilities where lead bullets are used;
* Formulation or processing of lead-containing pigments or paints;
* Cutting, burning, or melting of lead-containing materials.
The department recommends that annual blood lead testing be offered to all employees potentially overexposed to lead, including those performing the tasks listed above, regardless of air lead levels. Research has shown that air lead levels often do not accurately predict workers' lead overexpo-sure. The blood lead testing will provide the most information if performed during a period of peak lead exposure.
Employers should be aware that the United States Public Health Service has set a goal of eliminating occupational exposures which result in whole blood lead levels of 25 µg/dl or greater. This goal should guide whether employees' blood lead levels indicate lead overexposure.
If blood lead levels are elevated in an employee performing a task associated with lead overexposure, employers should assess the maintenance and effectiveness of exposure controls, hygiene facilities, respiratory protection program, the employee's work practices and personal hygiene, and the employee's respirator use, if any. If a deficiency exists in any of these areas, the employer should correct the problem.
Wash. Admin. Code § 296-62-07521
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060 and chapter 49.17 RCW. 12-24-071, § 296-62-07521, filed 12/4/12, effective 1/4/13. Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. 09-15-145, § 296-62-07521, filed 7/21/09, effective 9/1/09; 07-05-072, § 296-62-07521, filed 2/20/07, effective 4/1/07; 05-03-093, § 296-62-07521, filed 1/18/05, effective 3/1/05; 04-10-026, § 296-62-07521, filed 4/27/04, effective 8/1/04; 03-18-090, § 296-62-07521, filed 9/2/03, effective 11/1/03. Statutory Authority: RCW 49.17.010, [49.17].040, and [49.17].050. 01-11-038, § 296-62-07521, filed 5/9/01, effective 9/1/01; 99-10-071, § 296-62-07521, filed 5/4/99, effective 9/1/99. Statutory Authority: Chapter 49.17 RCW. 96-09-030, § 296-62-07521, filed 4/10/96, effective 6/1/96; 95-04-078, § 296-62-07521, filed 1/30/95, effective 3/2/95; 91-24-017 (Order 91-07), § 296-62-07521, filed 11/22/91, effective 12/24/91; 90-17-051 (Order 90-10), § 296-62-07521, filed 8/13/90, effective 9/24/90; 90-03-029 (Order 89-20), § 296-62-07521, filed 1/11/90, effective 2/26/90; 88-14-108 (Order 88-11), § 296-62-07521, filed 7/6/88. Statutory Authority: RCW 49.17.040 and 49.17.050. 83-24-013 (Order 83-34), § 296-62-07521, filed 11/30/83; 82-13-045 (Order 82-22), § 296-62-07521, filed 6/11/82. Formerly WAC 296-62-07349.