Section 296-304-06017 - Retention of DOT markings, placards, and labels(1) Any employer who receives a package of hazardous material that is required to be marked, labeled, or placarded in accordance with the U.S. Department of Transportation Hazardous Materials Regulations (49 C.F.R. parts 171 through 180) must retain those markings, labels, and placards on the package until the packaging is sufficiently cleaned of residue and purged of vapors to remove any potential hazards.(2) Any employer who receives a freight container, rail freight car, motor vehicle, or transport vehicle that is required to be marked or placarded in accordance with the U.S. Department of Transportation Hazardous Materials Regulations must retain those markings and placards on the freight container, rail freight car, motor vehicle, or transport vehicle until the hazardous materials are sufficiently removed to prevent any potential hazards.(3) You must maintain markings, placards, and labels in a manner that ensures that they are readily visible.(4) For nonbulk packages that will not be reshipped, the requirements of this section are met if a label or other acceptable marking is affixed in accordance with WAC 296-901-14012, Labels and other forms of warning and WAC 296-901-14014, Safety data sheets.(5) For the purposes of this section, the term "hazardous material" and any other terms not defined in this section have the same definition as specified in the U.S. Department of Transportation Hazardous Materials Regulations.Wash. Admin. Code § 296-304-06017
Amended by WSR 14-07-086, filed 3/18/14, effective 5/1/2014Amended by WSR 17-18-075, Filed 9/5/2017, effective 10/6/2017Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060, and chapter 49.17 RCW. 12-12-060, § 296-304-06017, filed 6/5/12, effective 8/1/12.