Wash. Admin. Code § 296-155-17315

Current through Register Vol. 24-20, October 15, 2024
Section 296-155-17315 - Methods of compliance
(1)Engineering controls and work practices and respirators.
(a) You must use one or any combination of the following control methods to achieve compliance with the permissible exposure limits prescribed by WAC 296-155-17317.
(i) Local exhaust ventilation equipped with HEPA filter dust collection systems;
(ii) General ventilation systems;
(iii) Use of work practices; or
(iv) Other engineering controls such as isolation and enclosure that the director can show to be feasible.
(b) Wherever the feasible engineering controls and work practices which can be instituted are not sufficient to reduce employee exposure to or below the PELs, you must use them to reduce employee exposure to the lowest levels achievable by these controls and you must supplement them by the use of respiratory protective devices which comply with the requirements of WAC 296-155-17317.
(2)Special provisions. For workers engaged in spray application methods, respiratory protection must be used in addition to feasible engineering controls and work practices to reduce employee exposure to or below the PELs.
(3)Prohibitions. Compressed air must not be used to remove MDA unless the compressed air is used in conjunction with an enclosed ventilation system designed to capture the dust cloud created by the compressed air.
(4)Employee rotation. You must not use employee rotation as a means of compliance with the exposure limits prescribed in WAC 296-155-17305.
(5)Compliance program.
(a) You must establish and implement a written program to reduce employee exposure to or below the PELs by means of engineering and work practice controls, as required by subsection (1) of this section, and by use of respiratory protection where permitted under this section.
(b) Upon request you must furnish this written program for examination and copying to the director, affected employees, and designated employee representatives. You must review and, as necessary, update such plans at least once every 12 months to make certain they reflect the current status of the program.

Wash. Admin. Code § 296-155-17315

Amended by WSR 16-09-085, Filed 4/19/2016, effective 5/20/2016

Statutory Authority: Chapter 49.17 RCW. 93-04-111 (Order 92-15), § 296-155-17315, filed 2/3/93, effective 3/15/93.