Statutes, codes, and regulations
Washington Administrative Code
Title 296 - Labor and Industries, Department of
Chapter 296-104 - Board of boiler rules-Substantive
Section 296-104-165 - Inspection - When should coverings be removed for inspection?

Wash. Admin. Code § 296-104-165

Download
PDF
Current through Register Vol. 24-23, December 1, 2024
Section 296-104-165 - Inspection - When should coverings be removed for inspection?

If the boiler or unfired pressure vessel is jacketed such that the longitudinal seams of shells, drums, or domes cannot be seen, or if pertinent information cannot be determined by other means, the following may be ordered by the inspector: Enough of the jacketing, setting wall, or other form of casing or housing shall be removed so that information necessary to determine the safety of the boiler or unfired pressure vessel can be obtained to the satisfaction of the inspector.

Wash. Admin. Code § 296-104-165

Statutory Authority: RCW 70.79.030 and 70.79.040. 99-22-026, § 296-104-165, filed 10/26/99, effective 11/26/99; 95-19-058, § 296-104-165, filed 9/15/95, effective 10/16/95; Part III, § 14, filed 3/23/60.