Section 246-272A-0025 - Connection to public sewer system(1) Upon the failure of an existing OSS within the service area of a sewer utility, the local health officer shall:(a) Permit the repair or replacement of the OSS only if a conforming OSS can be designed and installed, excluding OSS designed in compliance with or proposing to use Table X in WAC 246-272A-0280; or(b) Require connection to a public sewer system if the sewer utility allows the connection and has adequate public sewer services available within 200 feet from where the existing building drain connects to the existing building sewer, or where no building drain exists, within 200 feet from where the sewer line begins, as measured along the usual or most feasible route of access.(2) The owner of a structure served by an OSS permitted as a repair under Table X in WAC 246-272A-0280 shall abandon the OSS as specified in WAC 246-272A-0300, and connect the structure to a public sewer system when:(a) Connection is deemed necessary to protect public health by the local health officer;(b) An adequate public sewer becomes available within 200 feet of the existing structure, or in cases where no building drain exists, within 200 feet from where the sewer for the building begins, as measured along the usual or most economically feasible route of access; and(c) The sewer utility allows the sewer connection.(3) Local boards of health may require a new development to connect to a public sewer system to protect public health.(4) Local boards of health shall require new development or a development with a failing OSS to connect to a public sewer system if it is required by the comprehensive land use plan or development regulations.Wash. Admin. Code § 246-272A-0025
Amended by WSR 24-06-046, Filed 3/1/2024, effective 4/1/2024Statutory Authority: RCW 43.20.050. 05-15-119, § 246-272A-0025, filed 7/18/05, effective 9/15/05.