Section 204-50-070 - Alcohol set point of an ignition interlock device(1) An ignition interlock device must be capable of being preset by the manufacturer to an alcohol set point from.020 to.070 BrAC. (2) The alcohol set point of each ignition interlock device must be set at.020 BrAC, unless otherwise mandated by the originating court.(3) The capability to change the set point must be made secure by the manufacturer.(4) The manufacturer must notify the impaired driving section in writing within seven calendar days of installing an ignition interlock device with an alcohol set point other than .020 BrAC.(5) As used in this chapter, "alcohol set point" means the BrAC level at which the ignition interlock device will prevent the operator from starting the vehicle, and once the vehicle is started, the level below which the operator must record a test.Wash. Admin. Code § 204-50-070
Amended by WSR 22-01-068, Filed 12/9/2021, effective 1/9/2022Statutory Authority: RCW 43.43.395, 46.37.005, and 46.04.215. 12-17-153, § 204-50-070, filed 8/22/12, effective 10/1/12; 10-24-074, § 204-50-070, filed 11/30/10, effective 1/1/11. Statutory Authority: RCW 46.37.005 and 46.04.215. 09-18-073, § 204-50-070, filed 8/31/09, effective 10/1/09. Statutory Authority: RCW 46.61.688(2). 05-17-065, § 204-50-070, filed 8/11/05, effective 9/11/05. Statutory Authority: RCW 46.04.215 and 46.37.005. 99-01-156, § 204-50-070, filed 12/23/98, effective 1/1/99. Statutory Authority: 1987 c 247. 88-01-020 (Order 87-05-ESR), § 204-50-070, filed 12/9/87.