Section 16-231-910 - Boundaries and restrictions for Grant County Area 1(1) Area 1 description. (Lands generally within the Columbia Basin irrigation project.) An area starting at the southwest corner of Section 21, T14N, R27E; thence east along the county line four miles more or less to the southeast corner of Section 24, T14N, R27E; thence north along the county line sixteen miles to the southwest corner of Section 31, T17N, R28E; thence east along the county line thirteen miles more or less to the East Low Canal; thence northerly and easterly along the East Low Canal to the Adams County line; thence north along the Grant-Adams County lines six miles more or less to the East Low Canal; thence northwesterly along the East Low Canal to the southeast boundary of Block 70; thence easterly, northerly, and westerly, encompassing Block 70, Soap Lake and Block 701, to the West Main Canal; thence southwesterly along the West Main Canal to the north boundary line of Unit 1, Block 73; thence westerly along the northern boundary line of Block 73 to the northwest corner of Unit 278; then due west to the Willow Springs Draw; thence down Willow Springs Draw to the Columbia River; thence southerly along the Columbia River to the south boundary line of Section 11, T15N, R23E; thence east along the crest of the Saddle Mountains approximately eighteen miles to the northwest boundary of the atomic energy reservation; thence southwesterly along the atomic energy reservation boundary to Highway 24; thence south and west along Highway 24 to Vernita Bridge; thence easterly along the Columbia River to the point of beginning.(2) Area 1 restrictions. (a) The use or application of low volatile formulations of use restricted herbicides is prohibited on and after April 15th through October 31st: Provided, That low volatile ester formulations of 2,4-DB may be applied to alfalfa and red clover seed crops on and after November 1st through April 30th of the following year.(b) Ground applications of use restricted herbicides on asparagus shall conform to the manufacturer's specified combination of nozzle type/size and pressure in pounds per square inch (psi) at the nozzle that produces a spray droplet size that falls within the coarse (or larger) range as defined by the ASABE standards.Wash. Admin. Code § 16-231-910
Amended by WSR 19-02-039, Filed 12/26/2018, effective 1/26/2019Statutory Authority: Chapters 17.21, 15.58, and 34.05 RCW. 07-11-041A, § 16-231-910, filed 5/9/07, effective 6/9/07. Statutory Authority: Chapters 17.21 and 15.58 RCW. 87-18-060 (Order 1950), § 16-231-910, filed 9/1/87; 87-09-015 (Order 1923), § 16-231-910, filed 4/6/87; 80-03-031 (Order 1670), § 16-231-910, filed 2/20/80.