9 Va. Admin. Code § 5-50-250

Current through Register Vol. 41, No. 6, November 4, 2024

Section 9VAC5-50-250 - Definitions

A. For the purpose of applying this article in the context of the Regulations for the Control and Abatement of Air Pollution and related uses, the words or terms shall have the meanings given them in subsection C of this section.

B. Unless otherwise required by context, all terms not defined herein shall have the meanings given them in 9VAC5-80 (Permits for Stationary Sources), 9VAC5-10 (General Definitions), or commonly ascribed to them by recognized authorities, in that order of priority.

C. Terms defined.

"Best available control technology" or "BACT" means, as used in 9VAC5-50-260, an emissions limitation (including a visible emission standard) based on the maximum degree of emission reduction for any pollutant which would be emitted from a new stationary source or project which the board, on a case-by-case basis, taking into account energy, environmental and economic impacts and other costs, determines is achievable for the new stationary source or project through the application of production processes or available methods, systems and techniques, including fuel cleaning or treatment or innovative fuel combustion techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which would exceed the emissions allowed by any applicable standard in Article 5 (9VAC5-50-400 et seq.) of this part or Article 1 (9VAC5-60-60 et seq.) or Article 2 (9VAC5-60-90 et seq.) of Part II of 9VAC5-60 (Hazardous Air Pollutant Sources). If the board determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emission standard infeasible, a design, equipment, work practice, operational standard, or combination of them, may be prescribed instead of requiring the application of best available control technology. Such standard shall, to the degree possible, set forth the emission reduction achievable by implementation of such design, equipment, work practice or operation, and shall provide for compliance by means which achieve equivalent results. In determining best available control technology for stationary sources subject to Article 6 (9VAC5-80-1100 et seq.) of Part II of 9VAC5-80 (Permits for Stationary Sources), consideration shall be given to the nature and amount of the emissions, emission control efficiencies achieved in the industry for the source type, total cost effectiveness, and where appropriate, the cost effectiveness of the incremental emissions reduction achieved between control alternatives.

9 Va. Admin. Code § 5-50-250

Derived from VR120-05-0402, eff. January 1, 1985; amended, Virginia Register Volume 18, Issue 20, eff. September 1, 2002; Volume 22, Issue 23, eff. September 1, 2006; Volume 29, Issue 3, eff. November 7, 2012.

Statutory Authority

§ 10.1-1308 of the Code of Virginia; Clean Air Act (§§ 110, 112, 165, 173, 182 and Title V); 40 CFR Parts 51, 61, 63, 70 and 72.