9 Va. Admin. Code § 5-45-680

Current through Register Vol. 41, No. 4, October 8, 2024

Section 9VAC5-45-680 - Administrative requirements

Each manufacturer of an adhesive, sealant, adhesive primer, or sealant primer subject to the provisions of this article shall display the following information on the product container or label:

1. A statement of the manufacturer's recommendation regarding thinning, reducing, or mixing of the product, except that:

a. This requirement does not apply to the thinning of a product with water; and

b. If thinning of the product prior to use is not necessary, the recommendation must specify that the product is to be applied without thinning.

2. The maximum or the actual VOC content of the product as supplied, determined in accordance with 9VAC5-45-710, displayed in grams of VOC per liter of product.

3. The maximum or the actual VOC content of the product as applied (which includes the manufacturer's maximum recommendation for thinning), determined in accordance with 9VAC5-45-710, displayed in grams of VOC per liter of product.

9 Va. Admin. Code § 5-45-680

Derived from Virginia Register Volume 26, Issue 12, eff. March 17, 2010.

Statutory Authority

§ 10.1-1308 of the Code of Virginia.