9 Va. Admin. Code § 5-45-560

Current through Register Vol. 41, No. 4, October 8, 2024

Section 9VAC5-45-560 - Administrative requirements

Each manufacturer of any architectural coatings subject to this article shall display the information listed in subdivisions 1 through 8 of this section on the coating container (or label) in which the coating is sold or distributed.

1. The date the coating was manufactured, or a date code representing the date, shall be indicated on the label, lid, or bottom of the container. If the man-ufacturer uses a date code for any coating, the manufacturer shall file an explanation of each code with the board upon request of the board.

2. A statement of the manufacturer's recommendation regarding thinning of the coating shall be indicated on the label or lid of the container. This requirement does not apply to the thinning of architectural coatings with water. If thinning of the coating prior to use is not necessary, the recommendation shall specify that the coating is to be applied without thinning.

3. Each container of any coating subject to this article shall display either the maximum or the actual VOC content of the coating, as supplied, including the maximum thinning as recommended by the manufacturer. VOC content shall be displayed in grams of VOC per liter of coating. VOC content displayed shall be calculated using product formulation data, or shall be determined using the test methods in 9VAC5-45-590 C. The equations in 9VAC5-45-590 B shall be used to calculate VOC content.

4. In addition to the information specified in subdivisions 1, 2, and 3 of this section, each manufacturer of any industrial maintenance coating subject to this article shall display on the label or the lid of the container in which the coating is sold or distributed one or more of the descriptions listed in this subdivision.

a. "For industrial use only."

b. "For professional use only."

c. "Not for residential use" or "Not intended for residential use."

5. The labels of all clear brushing lacquers shall prominently display the statements "For brush application only," and "This product shall not be thinned or sprayed."

6. The labels of all rust preventive coatings shall prominently display the statement "For Metal Substrates Only."

7. The labels of all specialty primers, sealers, and undercoaters shall prominently display one or more of the descriptions listed in this subdivision.

a. For blocking stains.

b. For fire-damaged substrates.

c. For smoke-damaged substrates.

d. For water-damaged substrates.

e. For excessively chalky substrates.

8. The labels of all quick dry enamels shall prominently display the words "Quick Dry" and the dry hard time.

9. The labels of all nonflat high-gloss coatings shall prominently display the words "High Gloss."

9 Va. Admin. Code § 5-45-560

Derived from Virginia Register Volume 26, Issue 12, eff. March 17, 2010; Amended, Virginia Register Volume 40, Issue 14, eff. 4/11/2024.

Statutory Authority: § 10.1-1308 of the Code of Virginia.