19 Va. Admin. Code § 30-70-560

Current through Register Vol. 41, No. 6, November 4, 2024

Section 19VAC30-70-560 - Signal device (intention to stop or turn), hazard lights, stop lamps

A. Any motor vehicle may be equipped with a switch that will permit all turn signal lamps to flash simultaneously.

B. Supplemental turn signals, properly wired into the turn signal circuit may be installed. These may be either approved type turn signals or clearance lamps.

C. Inspect for and reject if:

1. Motor vehicle or trailer, except an antique vehicle not originally equipped with a stop lamp, is not equipped with at least two stop lamps of an approved type (DOT or SAE-S) that automatically exhibit a light through a red or amber lens to the rear when the brake pedal is actuated.

2. Proper signals do not go on with each throw of the switch or if stop signals do not go on with slightest pressure on the brake pedal. Turn signals may flash; however, stop signals may not flash.

Every passenger car manufactured for the 1986 or subsequent model year and multipurpose passenger vehicle, truck, or bus whose overall width is less than 80 inches, manufactured September 1, 1993, and subsequent model year is not equipped with a supplemental center high mount stop lamp of an approved type (DOT or SAE-U, U1 or U2) mounted at the vertical centerline of the vehicle that functions only in cooperation with the vehicle's brake lights and hazard lights. Any other vehicle on which a supplemental center high mount stop lamp is mounted shall have the lamp mounted at the vertical center line of the vehicle. The lamps shall be of an approved type and shall function only in conjunction with the stop lamps. The high mount stop lamp must be steady burning and not wired to flash with turn signals or other wig-wag device.

"Multipurpose passenger vehicle" means any motor vehicle that is (i) designed to carry no more than 10 persons and (ii) constructed either on a truck chassis or with special features for occasional off-road use.

NOTE: Multipurpose passenger vehicles with an overall width of 80 or more inches or GVWR of 10,000 pounds or more are not required to be equipped with a center high mount stop light.

3. Motor vehicle was manufactured after January 1, 1955, and is not equipped with approved signaling devices.

4. Vehicle is not equipped with a turn signal if such signal is not working properly or does not continue to function in the same manner as when it was originally manufactured. (The turn signal switch shall lock in place when positioned for a left turn or a right turn, and the turn signal indicators must function. Do not reject a vehicle if the self-canceling mechanism in the switch does not function when the steering wheel is rotated.)

5. Switch is not convenient to the driver or not of an approved type.

6. Any vehicle constructed so as to prevent the operator from making a hand and arm signal, if such vehicle is not equipped with an approved type signaling device.

7. Turn signal lens is not clear or amber to the front, or red or amber to the rear. Lens or bulb color has been altered or modified. If the lens is clear, then the bulb shall be amber.

NOTE: LED (light-emitting diode) lights with a clear lens are acceptable, if of an approved type. For those vehicles that are equipped with a multiple LED light (not filament-burning bulbs), they will pass inspection if more than 50% of the diode lights are burning.

8. Wiring or electrical connections are defective or filaments do not burn.

9. Lens has a piece broken from it. The lens may have one or more cracks provided an off-color light does not project through the cracks.

NOTE: Taping or gluing cracks or pieces is not allowed.

NOTE: The hazard warning signal operating unit shall operate independently of the ignition or equivalent switch, and when activated, cause all turn signals to flash simultaneously.

NOTE: They are deemed not to be installed if none of the lights burn or flash when the switch is activated and the hazard warning signal flasher unit has been removed.

10. Device is not mounted near rear for rear signals, or near front for front signals (except supplemental turn signals) or if the signal is hidden by a bolster or other part of body chassis.

A tractor truck need not be equipped with mechanical or electrical signal devices on the rear if it is equipped with double-faced signal lamps mounted on the front fenders or on the sides near the front of the vehicle clearly visible to the rear.

11. All "Class A" signals are not mounted at least three feet apart. (This does not apply to the combination rear signal device.) However, signal lamps that are mounted as far apart as practical inside and at the rear of the frame so as to be properly visible will meet inspection requirements.

12. Any vehicle has unapproved lens or plastic covers, any other materials that are not original equipment or any colored material placed on or in front of signal device (intention to stop or turn), hazard lights, or stop lamp.

ILLUSTRATIONS FOR PROPER INSTALLATION AND TYPE OF SIGNAL LIGHTS Click to view image Click to view image
TRUCK: Front Permissible -- Class A Type I Class A Type II Must show to front - may use two faced	TRUCK: Rear Permissible -- Class A Type I Class A Type II --or-- Combination Arrow Tail Stop & Signal		TRACTOR TRAILER: Front Permissible -- Class A Type I Class A Type II Two faced lamps - must show to both front and rear
Click to view image TRAILER: Rear Permissible Class A Type I Class A Type II		-- or --		Combination Arrow Tail Stop & Signal
Class A Type I - Are lamps which indicate a change in direction by giving flashing warning signal (clear lens - amber to front; amber to red on rear) on the side toward which the turn will be made. Class A Type II - Are lamps which indicate a change in direction by means of illuminated arrow heads (flashing or steady) on the side toward which the turn will be made.

Click to view image

19 Va. Admin. Code § 30-70-560

Derived from VR545-01-07 §56, eff. May 1, 1990; amended, Virginia Register Volume 10, Issue 8, eff. February 9, 1994; Volume 21, Issue 4, eff. September 22, 2004; Volume 24, Issue 8, eff. March 1, 2008; Amended, Virginia Register Volume 40, Issue 10, eff. 2/1/2024.

Statutory Authority: § 46.2-1165 of the Code of Virginia.