19 Va. Admin. Code § 30-70-400

Current through Register Vol. 41, No. 6, November 4, 2024

Section 19VAC30-70-400 - Motorcycle tires, wheels, rims

Inspect for and reject if:

1. Any tire has a cut or puncture, not to include a plug or patch that may be used as a manner of repair, or is worn so that the fabric is visible.

NOTE: Plugs/patches shall be in the tread area only. Plugs/patches are not permitted in the side wall of the tire.

2. Any tire has knots or bulges in any side wall or if there is evidence of a broken belt under the tread or of the tread separating from the fabric.

3. Any bolts, nuts, lugs or spokes are bent, loose or missing. Rims or wheels are bent, cracked or damaged so as to affect the safe operation of the motorcycle.

4. Wheel bearings are excessively worn or out of adjustment.

5. Any motorcycle is equipped with a tire that has a tread depth measuring less than 2/32 of an inch when measured in accordance with the instructions set forth in subdivisions 6, 7, and 8 of 19VAC30-70-130.

6. Any tire is marked specifically for use other than on the highway such as "For Farm Use Only," "For Off-Highway Use Only," "For Mobile Home Use Only," or "For Trailer Use Only."

7. Any motorcycle tire has been recut or regrooved.

8. Directional tires or wheels designed and manufactured to go in a certain direction or rotation are not installed in the proper direction of rotation.

19 Va. Admin. Code § 30-70-400

Derived from VR545-01-07 § 40, eff. May 1, 1990; amended, Virginia Register Volume 10, Issue 8, eff. February 9, 1994; Volume 21, Issue 4, eff. September 22, 2004; Volume 24, Issue 8, eff. March 1, 2008; Amended, Virginia Register Volume 32, Issue 24, eff. 10/3/2016.

Statutory Authority: § 46.2-1165 of the Code of Virginia.